Perfect Pallets Post Press | 4PUG.net
Find Solutions and Savings Here => Newspaper Post Press Discussion Forum => Topic started by: Gordon Rufh on June 27, 2017, 04:27:33 PM
-
We have a Quipp 500 stacker that won't energize the turntable when we push the start button. Anyone have this problem? We do have an air supply. Not sure if it has something to do with the light curtain safety.
Looking for a soluttion.
-
Hi Gordon,
You are on the right track going after the light curtains. If you need any parts, please contact Madeline (madeline@quipp.com)
with QUIPP
-
Hey Gord:
Might be the soft start.
Dave Hornik
-
If you need advice please call me at 423-341-8451
Thad H. Stone
Savannah Morning News
Maintenance Manager
912-525-0654
We have a Quipp 500 stacker that won't energize the turntable when we push the start button. Anyone have this problem? We do have an air supply. Not sure if it has something to do with the light curtain safety.
Looking for a soluttion.
-
Thanks to everyone who responded to my thread. It did turn out to be the soft start. When I first swapped out the soft start for a new one it still didn't work. I then realized the flow valve was turned all the way in on the new one. I simply used the same amount of turns on the old valve for the new valve and it was up and running.
A big thanks and thanks for the contact info in case I have other issues with these stackers.
Gord