Perfect Pallets Post Press

Welcome, Guest. Please login or register.
August 24, 2019, 07:03:52 PM

Recent Posts

Pages: [1] 2 3 ... 10
1
A service Plumtree performs for all users. The lasers need to come in for a check-up every now and again and as they age, at least once a year. We can extend their lifespan. We do this as we focus on count/product detection accuracy, it is all we do, going on 35 years now. Also, waste is one area we can always do a better job on but sensors must be sound. So, if you have a laser that needs a work-up, just email me on jcooper@plumtreecompany.com

or call, 912 507 9740

We line them up and knock them out on Thursdays, they are back quick and we pay return Ground shipping.

Best to all:

Julian Cooper
Plumtree Company
2
Newspaper Post Press Discussion Forum / Re: cross tying
« Last post by joejsa on August 21, 2019, 04:27:10 PM »
I have a couple of Dynaric 5000X Strappers

Joe Scott
JSA Machinery
256.997.9355 ext 101
joe@jsamachinery.com
3
Newspaper Post Press Discussion Forum / Re: SLS1000 Opening for 22"
« Last post by joejsa on August 21, 2019, 04:23:57 PM »
sounds like you need a pocket cut down,

We can help you with that,

Joe Scott
JSA Machinery
256.997.9355 ext 101
4
Newspaper Post Press Discussion Forum / SLS1000 Opening for 22"
« Last post by bgcurren on August 21, 2019, 04:59:11 AM »
I am pretty sure this has been asked long ago but I am having a difficult time opening 22" jackets.  The 1000 we have is our backup to our SLS2000 and has not been ran very much.  Our presses produce a 1/2" lap that is pretty square.  Years ago at my old newspaper the narrowest ran was 24" which was pretty easy to transition to from the old days of 27" but that was over 10 years ago.  If any one can provide pictures of their setup and any additional information I would greatly appreciate it.  I have a few 29" tab jobs that I have tested and of course with a wider web the opening is fine.

Thanks
Brion
5
A big hello to all from the Southern California Newspaper Group….I have a simple request:

Can you please take a look in your mailroom to see if you’ve accidentally acquired some of our plastic pallets? We’ve lost a bunch over the years and have gotten some back, but need to try and find the rest. Our plastic pallets have SCNG branded on the side with white, yellow or orange  paint highlighting the SCNG name. I’ve attached a picture showing this.

If you find any of our pallets, please let me know and I will arrange pickup to get them moved back into our plant. Your help is really appreciated.

Thx.

Bill Allgeier
Packaging & Transportation Manager
Southern California News Group
714-704-5835 office
714-932-1264 cell




6
Newspaper Post Press Discussion Forum / Quipp Twin-Trak Newspaper Conveyor help
« Last post by Tdorman on August 14, 2019, 12:03:53 PM »
Hello all,

We have a Quipp Twin-Trak Conveyor that is used as a emergency backup a floor below our NP200 Press Gripper Conveyor. If our conveyor goes down, we can just lower our press pickup table down and run the papers into the Twin-Trak.

It's been a while since we used it, and during inspection we found that the PLC battery had exploded and leaked all throughout the PLC. We unfortunately do not have a backup of the PLC program, are are looking for someone who may have a copy.

I have attached pictures showing the Quipp cabinet, Quipp identification plate, and the PLC in question.

Thanks ahead for any input, thoughts, and direction you guys can share.

7
Newspaper Post Press Discussion Forum / Re: Stacker interface....
« Last post by David Hornik on July 31, 2019, 12:07:19 PM »
Hi Don:
I can probably help guide you through the stacker side of that interface.  Please call or email if you need help.

Dave Hornik
630-420-9205
dave@ppt-inc.net
8
Newspaper Post Press Discussion Forum / Congratulations Newspapers!
« Last post by Alicia Chambers on July 31, 2019, 11:59:51 AM »
We have sent out over 300 Perfect Pallets Eco-Certificates! Collectively, you have helped divert over 100 millions lbs of wood waste from entering landfills in 2018.

If you have not received an Eco-Certificate and would like one, contact us at green@perfectpallets.com.

If you have received your 2018 Perfect Pallets Eco-Certificate, we'd love to hear your thoughts! Let us know your feedback at green@perfectpallets.com

Thank you all for your great efforts in compliantly saving, storing, and returning your Printer's Perfect Pallets last year. Let's keep the momentum going for 2019! :)

9
4PUG Announcements / 4PUG SUMMER CONTEST!
« Last post by Alicia Chambers on July 25, 2019, 03:51:37 PM »
Hello 4PUG Users,

It's that time of the year again... 4PUG SUMMER CONTEST TIME!

New 4PUG members will be entered in a draw to win a free pizza lunch for their mailroom team! So, encourage your fellow co-workers to sign up for 4PUG to increase your mailroom team's chance of winning!

Good luck!


10
Newspaper Post Press Discussion Forum / Stacker interface....
« Last post by Don Collier on July 08, 2019, 10:43:53 AM »
Greeting again folks. I am looking to start using my Kodak (Versamark DS5120 printing system, Kodak CS150) inline. Can someone direct me in a direction that would be helpful in this process?
Pages: [1] 2 3 ... 10